Tuesday, October 22, 2019

Movie Summary - Reservoir Dogs essays

Movie Summary - Reservoir Dogs essays The movie Reservoir Dogs is the breakout hit of director Quentin Tarantino and was highly influenced by this week's in-class selection, Mean Streets. Reservoir Dogs was initially supposed to be made for $50,000 and shot in black and white until Tarantino's producer begged him for two months to raise money for the film and came up with $1.2 million. It grossed $2.812 million (leesmovieinfo.com) in the box office and had gone on to influence many other modern filmmakers in the last 12 years. Reservoir Dogs is not a film that a studio would have done because there is no protagonist. There is no "good guy" in the whole movie. Instead, we are shown a handful of characters with both good and bad traits, both relevant and irrelevant to the situation itself. The movie shows that loyalty is not always rewarded, and this is certainly not a value traditionally portrayed in Hollywood cinema. Reservoir Dogs has equilibrium, disruption, and more disruption, but absolutely no restoration whatsoever. While they are complex, the characters are easy to identify with because they all have distinctly human qualities and vulnerabilities... fear to hate, nothing is behind the curtain, it's all very out in the open. Each displays the emotion that the viewer has experienced throughout their life. The ending is resolved, but nothing was accomplished. The viewer leaves knowing that everyone is dead or captured, but there is a sense of wondering why, since there was no happy ending for anyone. One cannot help but wonder what the point of all the mayhem was. The editing was very well done, and one would never guess that the film was made with only a little over $1 million. The lighting was sufficient, the cameras didn't shake, and while there were no big special effects or stunts, the viewer is caught more in the story than explosions. The nonlinear timeline also added to the suspense of the movie. This movie has no traditional subculture at all. A woman sh...

Monday, October 21, 2019

Free Essays on Nike Of Samothrace

Nike of Samothrace Nike of Samothrace is one of the most famous of all Greek sculptures. Commonly called the â€Å"Winged Victory†, because Nike was the Greek goddess of victory, is a perfect symbol of the war-dominated Hellenistic Age. Carved to appear to be striding into the wind, the female form emerges with wildly agitated draperies and soaring wings. The wings from just behind the shoulders were sculpted with fine detail and utilize the mass that adds to the strength of Nike. The statue was carved free hand from Paros marble and stands eight feet tall. Surviving many earthquakes, wars and weather the statue suffered considerable damage over the years. When the statue was found in 1862, it was in 200 pieces. The left wing and right breast were restored. Both arms and head are missing and the right foot is gone. Nike required three years of restoration and even still many cracks, nicks, and cuts remain. Originally part of a sculptural group on the mountainous island of Samothrace, inside the area called Sanctuary of the Great Gods, there was a fountain and a reflecting pool, where Nike was to sit. The wind from the North Aegean sea causing small waves in the pool would have made the marble sculpture look natural and causing a realistic appearance. The intended display was as beautiful as the sculpture itself. Although there were no actual eyewitnesses, one hundred percent fact documentation, â€Å"The Winged Victory†, is thought to have been sculpted in commemoration of the great naval battle of Ptolemy off Cypriot Salamis, led by Demetrius. The discussion of why â€Å"The Winged Victory† was erected will probably go on for another hundred years, but the question of who sculpted the statue and in what style is still an unsolved mystery. Many believe the marble on the base is Rhodes and it is generally believed that the sculpture was made by a Rhodian, the style is debated. Today the sculpture is part of the collection of the Lo... Free Essays on Nike Of Samothrace Free Essays on Nike Of Samothrace Nike of Samothrace Nike of Samothrace is one of the most famous of all Greek sculptures. Commonly called the â€Å"Winged Victory†, because Nike was the Greek goddess of victory, is a perfect symbol of the war-dominated Hellenistic Age. Carved to appear to be striding into the wind, the female form emerges with wildly agitated draperies and soaring wings. The wings from just behind the shoulders were sculpted with fine detail and utilize the mass that adds to the strength of Nike. The statue was carved free hand from Paros marble and stands eight feet tall. Surviving many earthquakes, wars and weather the statue suffered considerable damage over the years. When the statue was found in 1862, it was in 200 pieces. The left wing and right breast were restored. Both arms and head are missing and the right foot is gone. Nike required three years of restoration and even still many cracks, nicks, and cuts remain. Originally part of a sculptural group on the mountainous island of Samothrace, inside the area called Sanctuary of the Great Gods, there was a fountain and a reflecting pool, where Nike was to sit. The wind from the North Aegean sea causing small waves in the pool would have made the marble sculpture look natural and causing a realistic appearance. The intended display was as beautiful as the sculpture itself. Although there were no actual eyewitnesses, one hundred percent fact documentation, â€Å"The Winged Victory†, is thought to have been sculpted in commemoration of the great naval battle of Ptolemy off Cypriot Salamis, led by Demetrius. The discussion of why â€Å"The Winged Victory† was erected will probably go on for another hundred years, but the question of who sculpted the statue and in what style is still an unsolved mystery. Many believe the marble on the base is Rhodes and it is generally believed that the sculpture was made by a Rhodian, the style is debated. Today the sculpture is part of the collection of the Lo...

Sunday, October 20, 2019

Battle of Cannae in the Second Punic War

Battle of Cannae in the Second Punic War The Battle of Cannae took place during the Second Punic War (218-210 BC) between Rome and Carthage.  The battle occurred on August 2, 216 BC at Cannae in southeast Italy. Commanders and Armies Carthage Hannibal45,000-54,000 men Rome Gaius Terentius VarroLucius Aemilius Paullus54,000-87,000 men Background After the start of the Second Punic War, the Carthaginian general Hannibal boldly crossed the Alps and invaded Italy. Winning battles at Trebia (218 BC) and Lake Trasimene (217 BC), Hannibal defeated armies led by  Tiberius Sempronius Longus and  Gaius Flaminius Nepos. In the wake of these victories, he moved south plundering the countryside and working to make Romes allies defect to Carthages side. Reeling from these defeats, Rome appointed Fabius Maximus to deal with the Carthaginian threat.  Avoiding direct contact with Hannibals army, Fabius struck at the enemys supply lines and practiced the form of attritional warfare that later bore his name. Unhappy with this indirect approach, the Senate did not renew Fabius dictatorial powers when his term ended and command passed to the consuls  Gnaeus Servilius Geminus and Marcus Atilius Regulus.   In the spring of 216 BC, Hannibal seized the Roman supply depot at Cannae in southeast Italy. Situated on the Apulian Plain, this position allowed Hannibal to keep his men well fed. With Hannibal sitting astride Romes supply lines, the Roman Senate called for action. Raising an army of eight legions, the command was given to the Consuls Gaius Terentius Varro and Lucius Aemilius Paullus. The largest army ever assembled by Rome, this force advanced to face the Carthaginians. Marching south, the consuls found the enemy encamped on the left bank of the Aufidus River. As the situation developed, the Romans were hampered by an unwieldy command structure which required the two consuls to alternate command on a daily basis. Battle Preparations Approaching the Carthaginian camp on July 31, the Romans, with the aggressive Varro in command, defeated a small ambush set by Hannibals men. Though Varro was emboldened by the minor victory, command passed to the more conservative Paullus the next day. Unwilling to fight the Carthaginians on the open ground due to his armys smaller cavalry force, he elected to encamp two-thirds of the army east of the river while establishing a smaller camp on the opposite bank. The next day, aware that it would be Varros turn, Hannibal advanced his army and offered battle hoping the lure the reckless Roman forward.  Assessing the situation, Paullus successfully prevented his compatriot from engaging. Seeing that the Romans were unwilling to fight, Hannibal had his cavalry harass the Roman water-bearers and raid in the vicinity of Varro and Paullus camps.   Seeking battle on August 2, Varro and Paullus formed up their army for battle with their infantry densely packed in the center and the cavalry on the wings. The Consuls planned to use the infantry to quickly break the Carthaginian lines. Opposite, Hannibal placed his cavalry and most veteran infantry on the wings and his lighter infantry in the center. As the two sides advanced, Hannibals center moved forward, causing their line to bow in a crescent shape. On Hannibals left, his cavalry charged forward and routed the Roman horse. Rome Crushed To the right, Hannibals cavalry was engaged with that of Romes allies. Having destroyed their opposite number on the left, the Carthaginian cavalry rode behind the Roman army and assaulted the allied cavalry from the rear. Under attack from two directions, the allied cavalry fled the field. As the infantry began to engage, Hannibal had his center slowly retreat, while ordering the infantry on the wings to hold their position. The tightly packed Roman infantry continued to advance after the retreating Carthaginians, unaware of the trap that was about to be sprung. As the Romans were drawn in, Hannibal ordered the infantry on his wings to turn and attack the Roman flanks. This was coupled with a massive assault on the Roman rear by the Carthaginian cavalry, which completely surrounded the Consuls army. Trapped, the Romans became so compressed that many did not have space to raise their weapons. To speed the victory, Hannibal ordered his men to cut the hamstrings of each Roman and then move on to the next, commenting that the lamed could be slaughtered later at the Carthaginians leisure. The fighting continued until evening with approximately 600 Romans dying per minute. Casualties and Impact Various accounts of the Battle of Cannae show that 50,000-70,000 of the Romans, with 3,500-4,500 taken prisoner. It is known that approximately 14,000 were able to cut their way out and reach the town of Canusium. Hannibals army suffered around 6,000 killed and 10,000 wounded. Though encouraged by his officers to march on Rome, Hannibal resisted as he lacked the equipment and supplies for a major siege. While victorious at Cannae, Hannibal would ultimately be defeated at the Battle of Zama (202 BC), and Carthage would lose the Second Punic War.

Saturday, October 19, 2019

EMC Certification for Portable Laptop Research Paper

EMC Certification for Portable Laptop - Research Paper Example Photos of the portable laptop (commonly also known as EUT = Equipment under test, for EMC testing requirements) is as shown below. The equipment conforms to the requirement of CISPR 16-1, CISPR 16-4-2, ANSI C63.2 and other required standards. Calibration of all test and measurement, including any accessories that may effect such calibration, is checked frequently to ensure the accuracy. Adjustments are made and correction factors are applied in accordance with the instructions contained in the respective manual based on lab accreditations such as FCC (602285)-USA, VCCI (Japan) and ISO/IEC (170025)-CNAS agencies (Refer to Lab Accreditations Table at end of report). There were no special accessories used during these test and there is no EUT modification or test standard deviation. Prior to taking the formal emissions data collected in this report many hours of pre-testing have been performed. The selection of the worst case system documented in this report was based upon this pre-testing. The portable laptop system (EUT) was set up as per the test configuration to simulate typical usage per the user's manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 metres is used and is placed on the ground plane as per EN 55022. Associated equipment, if needed, was placed as per EN 55022. ... 4.2 Radiated Emissions 5. Electromagnetic Emissions Test 5.1 Line Conducted Emissions Test - Measurement Procedures Utilized for Conducted Emissions The portable laptop system (EUT) was set up as per the test configuration to simulate typical usage per the user's manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 metres is used and is placed on the ground plane as per EN 55022. Associated equipment, if needed, was placed as per EN 55022. All I/O cables were positioned to simulate typical actual usage as per EN 55022. The test equipment EUT installed received AC power through a Line Impedance Stabilization Network (LISN), which supplied power source and was grounded to the ground plane. All associated equipment received power from a second LISN. For conducted emission test on telecommunication ports, a telecommunication port is connected by its signal cable to an impedance stabilization network (ISN). During the testing, the LAN utilization is in excess of 10 % and sustain that level for a minimum of 250 ms. The traffic rate is monitored by the program of NetSpeed. The EUT test program was started. Emissions were measured on each current carrying line of the EUT using an EMI Test Receiver connected to the LISN powering the EUT. The Receiver scanned from 150K Hz to 30MHz for emissions in each of the test modes. During the above scans under battery charging mode, the emissions were maximized by cable manipulation. The EUT configuration and cable configuration of the above highest emission level were recorded for reference of the final test. - Conducted Emissions Test Data The following data was collected with a spectrum analyzer in peak detection mode, unless otherwise noted. Temperature 17C; Rel. Humidity

International Business - International Market Case Study

International Business - International Market - Case Study Example It will investigate the current business strategies used by the company to conquer international markets, licensing and franchising, market strategies and ownership factors. Dell Inc. is an American computer hardware company which is based in Texas, U.S. The company manufactures, supports, develops and sells a wide variety of products and services including; PCs, data storage devices, network switches, software, computer peripherals etc. Dell Inc. is one of the biggest companies in the world but it has currently encountered a lot of competition from other players in the industry including IBM and HP. By the end of 2006, the company had an employee capacity of 78,700 throughout its branches all over the world. The company is owned by Michael Dell who, in 1984 while being a university student, founded the company in his dorm room. The company is currently a wholly owned subsidiary of Dell Computer Corporation After deciding to enter oversees market a variety of options were open to the company. These options vary with cost, risk and the degree of control which can be exercised over them in terms of security. Dell Inc. uses the following two methods of international marketing especially in some countries, such as those in Europe where the countries have developed infrastructure, organized import duty regulations etc. But in developing countries where level of economy is low, the company uses the direct method of exporting. Exporting Exporting is the direct sale of domestically produced goods in another country and does not require that the goods be produced in the target country. An example of this kind of marketing is counter trade. Counter trade is the expansion of operations in markets where competition is less but currency based exchange is not possible (Hollensen, 2004). Direct method In this method, DELL Inc. may agree to build a plant in a certain country and either assembles or manufactures their products and then operates as a full entity in the target country. An example of this method of trading is the barter trade. Direct methods have the following disadvantages i. It is difficult to set price and service quality ii. 'Dumping' may occur since it is not covered by GATT iii. Inconsistency in specifications and delivery iv. Quality may not be of international standards becoming so costly to the customer and trader. Indirect method The method of marketing does not require that the company invests in production facilities in the country and therefore, it is cheaper. The only costs that will be incurred are the marketing, transport and government expenses. This kind of marketing require full corporation of the following players; exporter which will be in this sense Dell Inc., importer in the target country, transport agents and the government trade officers. This is the marketing of goods produced in one country into another. In this case, there is no direct manufacturing in the intended country but significant investments in marketing are required. DELL Inc. can therefore manufacture their products in either Europe or Africa and export them directly to these countries. The advantages for this method are; production is home based hence less risky, gives an opportunity to learn markets abroad, potential risks of operating abroad are minimized. The only disadvantage of this method is that the company is at the merc ies of unscrupulous agents who make more profit than the company itself. Suitability of

Friday, October 18, 2019

An Accident that Has Changed the Life Essay Example | Topics and Well Written Essays - 1000 words

An Accident that Has Changed the Life - Essay Example My friend was walking ahead of me at a slower pace waiting for me to join him. Suddenly I heard screeching off breaks from a car and as I looked ahead, all I could see was my friend lying on the ground covered in a pool of blood. For once, I thought that I was in a dream but as I gained myself, I realized it was a reality and had to do something to save my friend. I rushed to him, called for an ambulance since the car that had hit him had swayed off the road and could not help him. Fortunately, a Good Samaritan offered to drive us to the nearest hospital. All through the journey, my friend did not move or make any sound and I was in complete denial that he could be dead. However, when we reached the hospital, the doctors rushed him to the emergency room and a few minutes later, he was pronounced dead. After the death of my friend, I was affected a lot and my parents had to schedule an appointment for some counseling sessions for me and after some time, I had to accept the fact that m y friend was gone but this whole incidence changed my life and from that point I changed a lot of views on very many things. After the incidence, I developed a phobia for roads and would never walk close to any major highways and roads. I would do everything to avoid walking in any road that had motorists and only felt safe in footpaths and streets that had no motorists. I came to understand that an accident can happen at any time on the road and that one has to be very careful especially when crossing major roads. Before this accident, I used to cross major highways at zebra crossing points but later on, I realized that the safest way to cross a road was by the use of flyovers. I, therefore, would opt to follow the long ways than to follow a shortcut that had speeding cars. In addition, when forced to cross the road, I have developed a habit of waiting for all the cars to pass and cross only when I cannot spot a car in any direction however far it may seem to be. Before the acciden t, I did not know much about road signs. By then I did not have a driving license and for that reason, I never noticed the importance of road signs. I later noticed that road signs are very important especially to drivers. The driver who hit my friend was at a higher speed in a place that had a road sign indicating that there were children crossing. The driver ignored this sign and for this reason, my friend lost his life. I, therefore, vowed that to become a driver, I had to ensure that I know all the road signs and be able to apply them in an everyday situation. I, therefore, believe that this accident influenced me a lot in terms of driving. I, therefore, believe that in the future I will be a good driver and would ensure that I obey all the road signs. This incident also influenced my society a lot. Before the accident, this spot was found of over speeding cars and as a result, many people had been killed at this same point. It was because of this incident that people said it wa s enough and there was demonstration all over the area. People wanted a final solution to this problem. They pressed for action to be taken to ensure that cars would be slower at this point. Because of this, several road signs were put in this place to indicate that there were schoolchildren crossing. In addition to that, several bumps were placed in this location to ensure that motorist would be slower at this point. The bumps, therefore, helped reduce many accident cases at this location. In addition, a zebra crossing was put in this place and helped many people in crossing this busy road. It was, therefore, a relief for most people in the community. To my friends mum, the whole incidence was a total transformation for her.

Social effects of Telecommuting Essay Example | Topics and Well Written Essays - 1000 words

Social effects of Telecommuting - Essay Example This means that home is no longer seen to be a refuge from a hard day’s work, but an extension of the workplace. Such situations may be problematic for some individuals because it leads to an increase in work related stress and other psychological conditions. In addition, the traditional way through which people worked and interacted at the office is lost, since the close proximity and interpersonal interactions that could be achieved at the workplace is lost. Telecommuting encourages the isolation of an individual from any form of social life and this may be detrimental to such a person’s mental health (Burger, et al 39). However, despite this isolation, by telecommuting, individuals save plenty of time which they can use working, hence an increase in productivity. In addition, with the development of new information technologies every day, the aspect of complete isolation will be completely lost in a few years, since there will be a renewal of interaction between work ers through video technologies. Such technologies will ensure that workers are able to see each other without any need for physical interaction, meaning that most of the work related activities will still be able to be done in the comfort of one’s home (Dombrow 685).Moreover, telecommuting brings about changes in the working patterns of individuals, especially those who have other obligations besides work. Among these are parents, who, because of their ability to work at home, get to spend more time with their children., something that is often beneficial for the latter (Iscan and Naktiyok 53). In addition, telecommuting enables those individuals who would otherwise not have been allowed in the workforce, in most cases disabled people, to be able to work from the comfort of their own homes, and this ensures that their levels of self-esteem due to the work they are doing is high. Furthermore, the feeling of isolation that such individuals may have is often removed due to their not having to go through the cumbersome effort of having to get to the workplace. Instead, the easy access to video calls and other technologies enables them to be able to communicate easily with their fellow workers. Moreover, telecommuting gives individuals the opportunity to continue working way past the age when they would have thought of retiring, because they do not have to spend plenty of time getting to work, instead working from home. Therefore, it has ensured that many people past their retirement age have remained productive and they are not under any pressure to stop working. This has created a situation where the knowledge and skills of individuals with years of experience have been retained, not only for the benefit of the company for which they work, but also for the